MODIG RigiMill MT Specification
MODIG's RigiMill MT (Moving Table) combines the highest quality in precision with rigidity
RigiMill MT achieves chip removal rates up to 55 cubic inches/min (0.9 litre) in titanium and 1,000 cubic inches/min (16.4 litres) in aluminium
The RigiMill Moving Table (MT) is the fixed-gantry with moving table. Its working envelope is suitable for shorter parts, up to 6,000 mm long.
MODIG's RigiMill MT includes a complete machine housing so the parts are processed in a fully covered working zone.
RigiMill MT is available in three sizes 80” (2,000 mm), 160” (4,000 mm) or 240” (6,000 mm).
RigiMill MT Technical Specification:
TRAVELS| X-axis 1 | 2,500, 4,500 or 6,500 | mm |
| X-axis 2 | 1,560 | mm |
| Z-axis | 900 | mm |
| A-axis | +/- 110 | degrees |
| C-axis | +/- 360 | degrees |
MAX PART CROSS SECTION
| Length | 2,000, 4,000 or 6,000 | mm |
| Width | 1,400 | mm |
| Height | 700 | mm |
ALUMINIUM SPINDLE
| Speed | up to 30,000 | rpm |
| Power S1 | up to 200 | KW |
HARD METAL SPINDLE
| Speed | 0-12,000 | rpm |
| Torque S1 | 500-2,500 | Nm |
TOOL CHANGER
| Number of tools | 100 | |
| Tool taper | HSK63-125A | |
| Tool changing time | 14 | sec, chip to chip |
FEED RATES
| X-Y-Z axes | 0-70 | m/min |
| A and C-axes | 360 | degrees/second |
ACCELERATION
| Acceleration | 8 | m/square second |
MATERIAL
| Aluminium, composite, cast iron, steel, titanium |
If you would like to view the specification in feet and inches then please visit the MODIG Machine Tool website.
Specifications of other MODIG advanced machining centres:
- MODIG EVM-2 specification
- MODIG HHV2 specification
- MODIG HHV3 specification
- MODIG RigiMill MG specification
TURNKEY COMPETITIVE SOLUTIONS
We would welcome the opportunity to provide time studies for your current parts and prepare a business case to demonstrate the competitive advantages and ROI that MODIG advanced machining solutions will deliver - please contact M-Tech UK to discuss your business needs in confidence.